Specifier's Guide to Drylining
Contents |
[edit] Who is the Specifiers’ Guide to Drylining for ?
Specifiers’ Guide – Drylining was published by the Finishes and Interiors Sector (FIS) in 2022.
The guide was written and produced by the FIS Drylining Working Group which comprises representation from manufacturers, designers and contractors working in the drylining sector.
The guide will help specification writers fully understand the criteria when writing a specification for drylining, including partitions, wall linings and shaft wall systems. Pulling together decades of experience, it is designed to help specifiers and designers understand the questions that should be addressed before the specification can be produced and then how the specification should be structured, and which standards referenced. The guide includes top tips when specifying drylining, as well as reference material to regulations for safety, fire performance and standards.
[edit] Comments on the publication
Iain McIlwee, FIS Chief Executive said: “Specifying drylining seems, on the face of it, simple enough: consider the look, performance and cost, and there it is. If only it were that simple there would not be cases where evidence of fire compartmentation could fail or fail to perform because the issue wasn’t apparent during the specification process.”
“A well written specification not only ensures the installation meets the client’s requirements, but it also means the specifier’s requirements are less open to interpretation, which is key for the whole supply chain if they are going to deliver the quality and detail first time, on time,” added Iain McIlwee.
[edit] Guide contents
The contents of the guide are:
- Foreword
- Introduction
- Scope
- RIBA plan of work
- The Specificaton
- Design Considerations
- Performance
- Design for security
- Other Material Characteristics
- Materials
- Drylining Systems
- Finishing
- Doors
- Project Planning
- Competence
- Checklist
- Appendix
- Glossary
The guide sits alongside other FIS best practice guides that relate to drylining including:
These guides work well when they are included in proposals and project plans to demonstrate how to best approach a project. The Specifiers’ Guide – Drylining is available for download here
For further information or for any questions please contact FIS at [email protected] or contact construction marketing communications agency Fabrick
--FIS
[edit] Related articles on Designing Buildings
Featured articles and news
Discover and contribute to our specialist wiki microsites
Conservation, BIM, Diversity, AONBs and Circularity.
The benefits of breathable external wall insulation
Not just energy efficiency, but also wellbeing.
IEQ and net zero, thermal comfort, air quality and noise
Four free key guides for all that you need from BSRIA.
A systematic approach to conservation.
A brief description and use from traditional to contemporary.
Delivering on a sustainability policy and action plan
How ECA exceeded its carbon reduction targets.
UKCA and CE marking; changes in detail
Pre and post brexit, now and the future of product certificates.
Construction product certification schemes
The role, background to and types of products certificates.
The construction industry ramps up for the general election
Election manifestos, charters, campaigns and comments.
Collaboration benefits of real-time file synchronisation
Three areas for users to focus on.
Time to recognise construction’s top talent.
Future of Green Skills in Sussex
A report on the incoming Green Skills revolution.
Sustainable Futures: Redefining Retrofit for Net Zero Living
The BSRIA Briefing 2024.
When flat roof specification becomes compromised.
Be alert to special features and techniques.
Practising Architect and Director of Sheldon Peever Studio.
Biodiversity net gain, tips and tools for small sites
How to deal with BNG when options become limited.
Registered building inspectors
Building types and conflicts of interest updates explained.
A brief run-down reminder of key points to note.
Comments
[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.